Removing the AC/DC Power Supply Warning: HIGH VOLTAGE: The AC/DC power supply PCB remains powered up whenever the system is plugged in, whether or not the system has been turned on. Use extreme caution when troubleshooting the system with the front bezel removed. Jvl devicenet and canopen expansion modules for mac. Don’t work alone. In the event of an electrical shock it is important to have another.

• Duo Optical Sensor Pcb For Mac Pro
• Duo Optical Sensor Pcb For Mac Free
• Duo Optical Sensor Pcb For Macbook

individual present who can provide assistance. Keep one hand in your pocket when working on any iMac system that is plugged in. This will help ensure that your body does not provide a path to ground in the event that you accidentally make contact with the line voltage. Don’t wear jewelry, watches, necklaces, or other metallic articles that could present a. risk if they accidentally make contact with the power supply circuitry. Use extreme caution when working around the power supply. The power supply contains 1.

A high voltage capacitor that may remain charged for several minutes even when the computer is unplugged. Never touch the leads on the top side of the power supply, especially the capacitor leads located near the warning sign. Note: If the computer is shut down by pulling the power cord, allow the power supply a good 2-3 minutes to discharge the capacitors before handling it. However, if you select “Shut Down” via the Apple menu, the computer will discharge the power supply capacitor almost immediately. Using a Torx T10 screwdriver, remove the four screws from the AC-DC power supply board. Replacement Note: Install the machine screws on the right side and the self tapping screws on the left side. Lift the power supply from the rear housing.

Duo Optical Sensor Pcb For Mac Pro

Replacing the AC/DC Power Supply Warning: The AC/DC power supply PCB remains powered up whenever the system is plugged in, whether or not the system has been turned on. Use extreme caution when troubleshooting the system with the front bezel removed. Don’t work alone. In the event of an electrical shock it is important to have another. individual present who can provide assistance. Keep one hand in your pocket when working on any iMac system that is plugged in.

This will help ensure that your body does not provide a path to ground in the event that you accidentally make contact with the line voltage. Don’t wear jewelry, watches, necklaces, or other metallic articles that could present a. risk if they accidentally make contact with the power supply circuitry.

Make sure the right and left pressure walls are in place. Note: There is a 240W and a 250W power supply.

Make sure to order the correct power supply according to the system serial number. LED #1 Indicates that the trickle voltage from the power supply has been detected by the main.

logic board. This LED will remain ON whenever the iMac is connected to a working AC power source. The LED will remain on even when the computer has been shut down or put to sleep. The LED will turn off only if the AC power source is disconnected or the power supply is faulty. LED #2 Indicates that the main logic board has detected proper power from the power supply when. the computer is turned on.

This LED will be ON when the computer is turned on and the power supply is working correctly. LED #3 Indicates that the computer and the video card are communicating. This LED will be ON. when the computer is communicating properly with the video card.

If LEDs 1 and 2 are ON and you heard the startup sound, but LED 3 is OFF, then the video card might be installed incorrectly or need replacement. LED #4 Indicates that the computer and the LCD display panel are communicating.

This LED will be. ON when the computer is turned on and video signal is being generated. If the LED is ON and there is no image on the LCD display panel, the LCD display panel or inverter might be installed incorrectly or need replacement. The replacement of the PS went as planned and cured the malfunction. I noted that after 4 years of use, one of the transducers on the original PS was blown, evinced by a bulging case and aperture in the end of it. Regarding the suction cups to pull off the plastic display cover: Did not want.

Duo Optical Sensor Pcb For Mac Free

Instead, I took two strips of gaffer tape. (approx 12 in. Long) and used those. From the middle of each strip, I pinched the duct tape to itself to form approx 2in. Square 'handles.' Then I pressed the two strips on the left and right of the cover surface, parallel to each other and spaced well apart.

The handles should be positioned at the approx. Vertical center of the cover.

Duo Optical Sensor Pcb For Macbook

The cover lifts off easily. When the repair is complete, the gaffer tape is easy to peel off and leaves no residue. If you fold the gaffer tape on itself to store, you can save it for another use. MUST be gaffer tape or other reposition-able tape. NOT DUCT TAPE.